Brake Caliper Seals ...

All our brake caliper seals are double lipped which is essential for smoother operation, We do not sell or stock the cheap china imports so many sell. We have used these seals in our own bikes and countless rebuilds without a issue. If were not happy to use them on our own bikes we would not sell them. Discounts offered at checkout if purchasing 2 or more.




Inner Joint Seals ...

Inner joint seal

12mm Inner Joint / Pinch Seals

These fit a number of motorcycles, Kawasaki, Honda, Suzuki etc.

You will receive 2x Inner Joint seals




Single Brake Caliper Seals ...

We get a lot of customers asking what size seals they need, Measure the size of your piston (edge to edge across the middle) this is the OD size (outer diameter) you will need below in a seal. Some calipers have different sized pistons so make sure you measure each one.

24mm OD Caliper Seal (Non Booted)

Made to OEM specification. Pressure and Dust Seal (Non Booted) Piston OD size – Please make sure your piston has a outer diameter size listed above. You will receive 1x Pressure and 1x Dust seal. 

27mm OD Caliper Seal (Non Booted) 

Made to OEM specification. Pressure and Dust Seal (Non Booted) Piston OD size – Please make sure your piston has a outer diameter size listed above. You will receive 1x Pressure and 1x Dust seal. 

30mm OD Caliper Seal (Non Booted)

Made to OEM specification. Pressure and Dust Seal (Non Booted) Piston OD size – Please make sure your piston has a outer diameter size listed above. You will receive 1x Pressure and 1x Dust seal. 

32mm OD Caliper Seal (Non Booted)

Made to OEM specification. Pressure and Dust Seal (Non Booted) Piston OD size – Please make sure your piston has a outer diameter size listed above. You will receive 1x Pressure and 1x Dust seal. 

34mm OD Caliper Seal (Non Booted) 

Made to OEM specification. Pressure and Dust Seal (Non Booted) Piston OD size – Please make sure your piston has a outer diameter size listed above. You will receive 1x Pressure and 1x Dust seal. 

38mm OD Caliper Seal (Non Booted) 

Made to OEM specification. Pressure and Dust Seal (Non Booted) Piston OD size – Please make sure your piston has a outer diameter size listed above. You will receive 1x Pressure and 1x Dust seal. 




Brake Caliper Rebuild Packs ...

Our pre made packs makes it easier for our customers to find the sizes of their seals without splitting their calipers. If you are unsure of your size please contact us and we will be happy to help point you in the right direction.

Honda ...

Honda CBR-600 F4i – Front Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 4 sets of seals (4x Pressure and 4x Dust seals) enough to complete 1 caliper.




Kawasaki ...

Kawasaki ER-5 A2 – Front Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 2 set of seals (2x Pressure and 2x Dust seals) enough to complete 1 caliper.

Kawasaki ER-6 – Rear Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 1 set of seals (1x Pressure and 1x Dust seals) enough to complete 1 caliper.

Kawasaki ER-6 / EX-650 – Front Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 2 set of seals (2x Pressure and 2x Dust seals) enough to complete 1 caliper.

Kawasaki ZX-6R – Rear Caliper Seal Rebuild Pack 

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 1 set of seals (1x Pressure and 1x Dust seals) enough to complete 1 caliper.

Kawasaki ZZR-600 D & E – Front Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 4 sets of seals (4x Pressure and 4x Dust seals) enough to complete 1 caliper.

Kawasaki ZZR-600 D – Rear Caliper Seal Rebuild Pack 

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 2 sets of seals (2x Pressure and 2x Dust seals) enough to complete 1 caliper.

Kawasaki ZZR-600 E – Rear Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 1 set of seals (1x Pressure and 1x Dust seals) enough to complete 1 caliper.

Kawasaki ZZR-1100 C & D – Front Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 4 sets of seals (4x Pressure and 4x Dust seals) enough to complete 1 caliper.

Kawasaki ZZR-1100 C – Rear Caliper Seal Rebuild Pack

Made to OEM specification. Pressure and Dust Seal (Non Booted). You will receive 2 sets of seals (2x Pressure and 2x Dust seals) enough to complete 1 caliper.